3D Printed Shadow Lamp
A 3D printed shadow lamp is a small box you print in a few flat pieces; a tiny LED inside throws the picture on its front panel across your wall. Pick one of our original designs below or turn your own picture into a model, then download a ZIP of parts that print without supports on any FDM printer.





















Every design opens in the generator, where you can change the size and projection style before downloading.
What Is a 3D Printed Shadow Lamp?
Think of it as a projector with no lens. The walls are printed in dark, opaque plastic so they block light; only the cut-outs in the front panel let it through. Because the LED is small and sits in the middle of the box, the light travels in straight lines and draws a sharp, enlarged copy of the panel on the wall.
Printing your own means you choose the picture, the size and the color of the filament, and a lamp costs only a few dollars in plastic and a small LED. Ours is designed so the pieces lie flat on the bed and glue together without screws or special hardware. A warm-white LED gives the coziest glow, while a cool-white one makes the edges look a little sharper on light-colored walls.
A shadow lamp 3D model in six flat parts
The model is split into a front panel with the picture, a back panel with a cable hole, two side walls, a lid and a base with an LED post. Flat parts print quickly and need no supports.
Open a design3D shadow lamp sizes
Choose Standard (110 × 140 mm front panel) for a living room or bedroom wall, or Mini (55 × 70 mm) for a desk, shelf or a small gift that fits any printer bed.
Compare sizes in the generatorA 3D printed shadow lamp housing that blocks stray light
The side walls overlap the front and back so the corners stay dark, and the lid closes the top. Light can only escape through the picture, which keeps the wall image crisp.
See how the housing goes togetherWhy Use Our 3D Printed Shadow Lamp Files?
Shared models are usually made for one picture at one size. These files are generated for the design and size you choose, and each one is checked before you download it, so details that would snap off or never show on the wall are fixed in advance.
Shadow lamp STL files that print flat
Every part is a simple extruded plate with no overhangs, so the files slice cleanly in Bambu Studio, PrusaSlicer, OrcaSlicer or Cura and print without supports or brims.
Make your own STLA shadow light STL from your own picture
Upload a silhouette, a logo or a pet photo and the generator turns it into a front panel. Floating details such as eyes and stars are held by thin bars, so the panel comes off the bed in one piece.
Upload a pictureShadow lamp 3D print settings that work
Use dark PLA or PETG, 0.2 mm layers, two or more walls and 15–20% infill. Thin dark walls stop light leaking, and the README in each download repeats the settings next to the assembly steps.
Read the full guideHow to Use It in 3 Steps
1. Pick a shadow lamp 3D model or upload your own
Open any template from the gallery above, or upload a PNG, JPG, WebP or SVG picture. Choose light pattern or shadow, the lamp size and how tall the picture should be on the wall.
Browse all templates2. Download the shadow lamp STL ZIP
Sign in and press Download STL. Your first download each day is free; extra downloads use one credit, and Pro includes unlimited downloads with a commercial license.
See plans3. 3D print shadow lamp parts and assemble
Print the six parts, push a small LED onto the post, run the wire through the channel in the base and glue the walls in place. Set the lamp at the distance shown in the generator and switch off the lights.
Step-by-step assembly3D Printed Shadow Lamp FAQ
How do I make a 3D printed shadow lamp?
Choose a template or upload a picture, download the ZIP of STL parts, print them flat in dark filament, add a small LED and glue the box together. Most lamps take an evening of printing and about ten minutes to assemble.
Where can I get shadow lamp STL files?
Right here: every template on this page opens in the generator and downloads as a ZIP of STL files. Signed-in users get one free download a day.
Can I turn my own picture into a 3D shadow lamp model?
Yes. Upload a picture in the generator and it builds the front panel from your image. For photos, the AI cutout removes the background first.
What filament is best for a 3D printed shadow lamp?
Dark, opaque PLA or PETG. Black or dark gray blocks light best; white and translucent filaments let light glow through the walls and wash out the picture.
What print settings should I use?
0.2 mm layer height, at least two walls, 15–20% infill and your usual speed. A 0.4 mm nozzle handles the details the generator keeps.
Do the parts need supports?
No. Every part is a flat plate printed on its back, including the base with its LED post, so there are no overhangs to support.
What is inside the download?
A ZIP with six STL files — front panel, back panel, right side, left side, top and base — and a README with the wall distance, print settings and assembly steps.
Will the parts fit my printer bed?
Yes for almost any printer. The largest parts of the Standard lamp are the 110 × 140 mm front and back panels; every Mini lamp part is under 75 mm.
Which slicers open the files?
Any slicer that reads binary STL, including Bambu Studio, PrusaSlicer, OrcaSlicer, Cura and Simplify3D.
Why does light leak through the walls?
Light or translucent filament and single-wall prints let light through. Reprint the walls in dark filament with two or more perimeters, and check that the glued corners are tight.
How long does it take to print?
The parts are thin and flat, so a Standard lamp typically prints in a few hours on a modern printer, and a Mini lamp in about an hour. Your printer and settings decide the exact time.
Can I sell the lamps I print from these files?
Free and credit downloads are for personal use and gifts. Pro includes a commercial license for selling printed lamps.
Make your first shadow lamp
Upload a picture, check the wall preview and download your STL in a couple of minutes.
Start designing